Módulo:Citação/CS1/Identificadores
Módulo:Citação/CS1/Identificadores (discussão⧼dot-separator⧽Predefinição:Editar⧼dot-separator⧽Predefinição:History⧼dot-separator⧽links⧼dot-separator⧽doc⧼dot-separator⧽subpages⧼dot-separator⧽testes (resultados)⧼dot-separator⧽Predefinição:Em-multi/Testeslinks)
 | This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing. |
 | Este módulo é usado em 500 000+ páginas. (Ver Wikihelp:Predefinições em alto risco) Para evitar sobrecargas desnecessárias ao servidor e outros transtornos, quaisquer mudanças devem ser previamente testadas, seja na predefinição de testes ou em Módulo:Citação/CS1/Identificadores/Testes (ou ainda em sua página de testes). Por favor, sempre considere expor eventuais mudanças na página de discussão, antes de implementá-las. |
Esta página mostra e processa a verificação de erros em vários identificadores nomeados nos identificadores suportados em Módulo:Citação/CS1.
Estes ficheiros formam o suporte de módulo das predefinições de citar cs1|2:
local identifiers = {};
--[[--------------------------< F O R W A R D D E C L A R A T I O N S >--------------------------------------
]]
local is_set, in_array, set_error, select_one, add_maint_cat, substitute; -- functions in Module:Citation/CS1/Utilities
local z; -- table of tables defined in Module:Citation/CS1/Utilities
local cfg; -- table of configuration tables that are defined in Module:Citation/CS1/Configuration
--[[--------------------------< E X T E R N A L _ L I N K _ I D >----------------------------------------------
Formats a wiki style external link
]]
local function external_link_id(options)
local url_string = options.id;
local ext_link;
if options.encode == true or options.encode == nil then
url_string = mw.uri.encode( url_string );
end
ext_link = mw.ustring.format ('[%s%s%s %s]', options.prefix, url_string, options.suffix or "", mw.text.nowiki(options.id));
if is_set(options.access) then
ext_link = substitute (cfg.presentation[options.access], ext_link); -- add the free-to-read / paywall lock
end
return mw.ustring.format( '[[%s|%s]]%s%s', options.link, options.label, options.separator or " ", ext_link);
-- return mw.ustring.format( '[[%s|%s]]%s[%s%s%s %s]',
-- options.link, options.label, options.separator or " ",
-- options.prefix, url_string, options.suffix or "",
-- mw.text.nowiki(options.id)
-- );
end
--[[--------------------------< I N T E R N A L _ L I N K _ I D >----------------------------------------------
Formats a wiki style internal link
]]
local function internal_link_id(options)
return mw.ustring.format( '[[%s|%s]]%s[[%s%s%s|%s]]',
options.link, options.label, options.separator or " ",
options.prefix, options.id, options.suffix or "",
mw.text.nowiki(options.id)
);
end
--[[--------------------------< IS _ V A L I D _ I S X N >-----------------------------------------------------
ISBN-10 and ISSN validator code calculates checksum across all isbn/issn digits including the check digit.
ISBN-13 is checked in check_isbn().
If the number is valid the result will be 0. Before calling this function, issbn/issn must be checked for length
and stripped of dashes, spaces and other non-isxn characters.
]]
local function is_valid_isxn (isxn_str, len)
local temp = 0;
isxn_str = { isxn_str:byte(1, len) }; -- make a table of byte values '0' → 0x30 .. '9' → 0x39, 'X' → 0x58
len = len+1; -- adjust to be a loop counter
for i, v in ipairs( isxn_str ) do -- loop through all of the bytes and calculate the checksum
if v == string.byte( "X" ) then -- if checkdigit is X (compares the byte value of 'X' which is 0x58)
temp = temp + 10*( len - i ); -- it represents 10 decimal
else
temp = temp + tonumber( string.char(v) )*(len-i);
end
end
return temp % 11 == 0; -- returns true if calculation result is zero
end
--[[--------------------------< IS _ V A L I D _ I S X N _ 1 3 >----------------------------------------------
ISBN-13 and ISMN validator code calculates checksum across all 13 isbn/ismn digits including the check digit.
If the number is valid, the result will be 0. Before calling this function, isbn-13/ismn must be checked for length
and stripped of dashes, spaces and other non-isxn-13 characters.
]]
local function is_valid_isxn_13 (isxn_str)
local temp=0;
isxn_str = { isxn_str:byte(1, 13) }; -- make a table of byte values '0' → 0x30 .. '9' → 0x39
for i, v in ipairs( isxn_str ) do
temp = temp + (3 - 2*(i % 2)) * tonumber( string.char(v) ); -- multiply odd index digits by 1, even index digits by 3 and sum; includes check digit
end
return temp % 10 == 0; -- sum modulo 10 is zero when isbn-13/ismn is correct
end
--[[--------------------------< C H E C K _ I S B N >------------------------------------------------------------
Determines whether an ISBN string is valid
]]
local function check_isbn( isbn_str )
if nil ~= isbn_str:match("[^%s-0-9X]") then
return false, 'invalid character'; -- fail if isbn_str contains anything but digits, hyphens, or the uppercase X
end
isbn_str = isbn_str:gsub( "-", "" ):gsub( " ", "" ); -- remove hyphens and spaces
local len = isbn_str:len();
if len ~= 10 and len ~= 13 then
return false, 'length'; -- fail if incorrect length
end
if len == 10 then
if isbn_str:match( "^%d*X?$" ) == nil then -- fail if isbn_str has 'X' anywhere but last position
return false, 'invalid form';
end
return is_valid_isxn(isbn_str, 10), 'checksum';
else
if isbn_str:match( "^%d+$" ) == nil then
return false, 'invalid character'; -- fail if isbn13 is not all digits
end
if isbn_str:match( "^97[89]%d*$" ) == nil then
return false, 'invalid prefix'; -- fail when isbn13 does not begin with 978 or 979
end
return is_valid_isxn_13 (isbn_str), 'checksum';
end
end
--[[--------------------------< I S M N >----------------------------------------------------------------------
Determines whether an ISMN string is valid. Similar to isbn-13, ismn is 13 digits begining 979-0-... and uses the
same check digit calculations. See http://www.ismn-international.org/download/Web_ISMN_Users_Manual_2008-6.pdf
section 2, pages 9–12.
]]
local function ismn (id)
local handler = cfg.id_handlers['ISMN'];
local text;
local valid_ismn = true;
local id_copy;
id_copy = id; -- save a copy because this testing is destructive
id=id:gsub( "[%s-–]", "" ); -- strip spaces, hyphens, and endashes from the ismn
if 13 ~= id:len() or id:match( "^9790%d*$" ) == nil then -- ismn must be 13 digits and begin 9790
valid_ismn = false;
else
valid_ismn=is_valid_isxn_13 (id); -- validate ismn
end
-- text = internal_link_id({link = handler.link, label = handler.label, -- use this (or external version) when there is some place to link to
-- prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode})
text="[[" .. handler.link .. "|" .. handler.label .. "]]" .. handler.separator .. id_copy; -- because no place to link to yet
if false == valid_ismn then
text = text .. ' ' .. set_error( 'bad_ismn' ) -- add an error message if the ismn is invalid
end
return text;
end
--[[--------------------------< I S S N >----------------------------------------------------------------------
Validate and format an issn. This code fixes the case where an editor has included an ISSN in the citation but
has separated the two groups of four digits with a space. When that condition occurred, the resulting link looked
like this:
|issn=0819 4327 gives: [http://www.worldcat.org/issn/0819 4327 0819 4327] -- can't have spaces in an external link
This code now prevents that by inserting a hyphen at the issn midpoint. It also validates the issn for length
and makes sure that the checkdigit agrees with the calculated value. Incorrect length (8 digits), characters
other than 0-9 and X, or checkdigit / calculated value mismatch will all cause a check issn error message. The
issn is always displayed with a hyphen, even if the issn was given as a single group of 8 digits.
]]
local function issn(id, e)
local issn_copy = id; -- save a copy of unadulterated issn; use this version for display if issn does not validate
local handler;
local text;
local valid_issn = true;
if e then
handler = cfg.id_handlers['EISSN'];
else
handler = cfg.id_handlers['ISSN'];
end
id=id:gsub( "[%s-–]", "" ); -- strip spaces, hyphens, and endashes from the issn
if 8 ~= id:len() or nil == id:match( "^%d*X?$" ) then -- validate the issn: 8 digits long, containing only 0-9 or X in the last position
valid_issn=false; -- wrong length or improper character
else
valid_issn=is_valid_isxn(id, 8); -- validate issn
end
if true == valid_issn then
id = string.sub( id, 1, 4 ) .. "-" .. string.sub( id, 5 ); -- if valid, display correctly formatted version
else
id = issn_copy; -- if not valid, use the show the invalid issn with error message
end
text = external_link_id({link = handler.link, label = handler.label,
prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode})
if false == valid_issn then
text = text .. ' ' .. set_error( 'bad_issn', e and 'e' or '' ) -- add an error message if the issn is invalid
end
return text
end
--[[--------------------------< A M A Z O N >------------------------------------------------------------------
Formats a link to Amazon. Do simple error checking: asin must be mix of 10 numeric or uppercase alpha
characters. If a mix, first character must be uppercase alpha; if all numeric, asins must be 10-digit
isbn. If 10-digit isbn, add a maintenance category so a bot or awb script can replace |asin= with |isbn=.
Error message if not 10 characters, if not isbn10, if mixed and first character is a digit.
]]
local function amazon(id, domain)
local err_cat = ""
if not id:match("^[%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u]$") then
err_cat = ' ' .. set_error ('bad_asin'); -- asin is not a mix of 10 uppercase alpha and numeric characters
else
if id:match("^%d%d%d%d%d%d%d%d%d[%dX]$") then -- if 10-digit numeric (or 9 digits with terminal X)
if check_isbn( id ) then -- see if asin value is isbn10
add_maint_cat ('ASIN');
elseif not is_set (err_cat) then
err_cat = ' ' .. set_error ('bad_asin'); -- asin is not isbn10
end
elseif not id:match("^%u[%d%u]+$") then
err_cat = ' ' .. set_error ('bad_asin'); -- asin doesn't begin with uppercase alpha
end
end
if not is_set(domain) then
domain = "com";
elseif in_array (domain, {'jp', 'uk'}) then -- Japan, United Kingdom
domain = "co." .. domain;
elseif in_array (domain, {'au', 'br', 'mx'}) then -- Australia, Brazil, Mexico
domain = "com." .. domain;
end
local handler = cfg.id_handlers['ASIN'];
return external_link_id({link=handler.link,
label=handler.label, prefix=handler.prefix .. domain .. "/dp/",
id=id, encode=handler.encode, separator = handler.separator}) .. err_cat;
end
--[[--------------------------< A R X I V >--------------------------------------------------------------------
See: http://arxiv.org/help/arxiv_identifier
format and error check arXiv identifier. There are three valid forms of the identifier:
the first form, valid only between date codes 9108 and 0703 is:
arXiv:<archive>.<class>/<date code><number><version>
where:
<archive> is a string of alpha characters - may be hyphenated; no other punctuation
<class> is a string of alpha characters - may be hyphenated; no other punctuation
<date code> is four digits in the form YYMM where YY is the last two digits of the four-digit year and MM is the month number January = 01
first digit of YY for this form can only 9 and 0
<number> is a three-digit number
<version> is a 1 or more digit number preceded with a lowercase v; no spaces (undocumented)
the second form, valid from April 2007 through December 2014 is:
arXiv:<date code>.<number><version>
where:
<date code> is four digits in the form YYMM where YY is the last two digits of the four-digit year and MM is the month number January = 01
<number> is a four-digit number
<version> is a 1 or more digit number preceded with a lowercase v; no spaces
the third form, valid from January 2015 is:
arXiv:<date code>.<number><version>
where:
<date code> and <version> are as defined for 0704-1412
<number> is a five-digit number
]]
local function arxiv (id, class)
local handler = cfg.id_handlers['ARXIV'];
local year, month, version;
local err_cat = '';
local text;
if id:match("^%a[%a%.%-]+/[90]%d[01]%d%d%d%d$") or id:match("^%a[%a%.%-]+/[90]%d[01]%d%d%d%dv%d+$") then -- test for the 9108-0703 format w/ & w/o version
year, month = id:match("^%a[%a%.%-]+/([90]%d)([01]%d)%d%d%d[v%d]*$");
year = tonumber(year);
month = tonumber(month);
if ((not (90 < year or 8 > year)) or (1 > month or 12 < month)) or -- if invalid year or invalid month
((91 == year and 7 > month) or (7 == year and 3 < month)) then -- if years ok, are starting and ending months ok?
err_cat = ' ' .. set_error( 'bad_arxiv' ); -- set error message
end
elseif id:match("^%d%d[01]%d%.%d%d%d%d$") or id:match("^%d%d[01]%d%.%d%d%d%dv%d+$") then -- test for the 0704-1412 w/ & w/o version
year, month = id:match("^(%d%d)([01]%d)%.%d%d%d%d[v%d]*$");
year = tonumber(year);
month = tonumber(month);
if ((7 > year) or (14 < year) or (1 > month or 12 < month)) or -- is year invalid or is month invalid? (doesn't test for future years)
((7 == year) and (4 > month)) then --or -- when year is 07, is month invalid (before April)?
err_cat = ' ' .. set_error( 'bad_arxiv' ); -- set error message
end
elseif id:match("^%d%d[01]%d%.%d%d%d%d%d$") or id:match("^%d%d[01]%d%.%d%d%d%d%dv%d+$") then -- test for the 1501- format w/ & w/o version
year, month = id:match("^(%d%d)([01]%d)%.%d%d%d%d%d[v%d]*$");
year = tonumber(year);
month = tonumber(month);
if ((15 > year) or (1 > month or 12 < month)) then -- is year invalid or is month invalid? (doesn't test for future years)
err_cat = ' ' .. set_error( 'bad_arxiv' ); -- set error message
end
else
err_cat = ' ' .. set_error( 'bad_arxiv' ); -- arXiv id doesn't match any format
end
text = external_link_id({link = handler.link, label = handler.label,
prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode, access=handler.access}) .. err_cat;
if is_set (class) then
class = ' [[' .. '//arxiv.org/archive/' .. class .. ' ' .. class .. ']]'; -- external link within square brackets, not wikilink
else
class = ''; -- empty string for concatenation
end
return text .. class;
end
--[[--------------------------< B I O R X I V >-----------------------------------------------------------------
Format bioRxiv id and do simple error checking. BiorXiv ids are exactly 6 digits.
The bioRxiv id is the number following the last slash in the bioRxiv-issued DOI:
http://dx.doi.org/10.1101/078733 -> 078733
]]
local function biorxiv(id)
local handler = cfg.id_handlers['BIORXIV'];
local err_cat = ''; -- presume that bioRxiv id is valid
if nil == id:match("^%d%d%d%d%d%d$") then -- if bioRxiv id has anything but six digits
err_cat = ' ' .. set_error( 'bad_biorxiv'); -- set an error message
end
return external_link_id({link = handler.link, label = handler.label,
prefix=handler.prefix,id=id,separator=handler.separator,
encode=handler.encode, access=handler.access}) .. err_cat;
end
--[[--------------------------< N O R M A L I Z E _ L C C N >--------------------------------------------------
lccn normalization (http://www.loc.gov/marc/lccn-namespace.html#normalization)
1. Remove all blanks.
2. If there is a forward slash (/) in the string, remove it, and remove all characters to the right of the forward slash.
3. If there is a hyphen in the string:
a. Remove it.
b. Inspect the substring following (to the right of) the (removed) hyphen. Then (and assuming that steps 1 and 2 have been carried out):
1. All these characters should be digits, and there should be six or less. (not done in this function)
2. If the length of the substring is less than 6, left-fill the substring with zeroes until the length is six.
Returns a normalized lccn for lccn() to validate. There is no error checking (step 3.b.1) performed in this function.
]]
local function normalize_lccn (lccn)
lccn = lccn:gsub ("%s", ""); -- 1. strip whitespace
if nil ~= string.find (lccn,'/') then
lccn = lccn:match ("(.-)/"); -- 2. remove forward slash and all character to the right of it
end
local prefix
local suffix
prefix, suffix = lccn:match ("(.+)%-(.+)"); -- 3.a remove hyphen by splitting the string into prefix and suffix
if nil ~= suffix then -- if there was a hyphen
suffix=string.rep("0", 6-string.len (suffix)) .. suffix; -- 3.b.2 left fill the suffix with 0s if suffix length less than 6
lccn=prefix..suffix; -- reassemble the lccn
end
return lccn;
end
--[[--------------------------< L C C N >----------------------------------------------------------------------
Format LCCN link and do simple error checking. LCCN is a character string 8-12 characters long. The length of
the LCCN dictates the character type of the first 1-3 characters; the rightmost eight are always digits.
http://info-uri.info/registry/OAIHandler?verb=GetRecord&metadataPrefix=reg&identifier=info:lccn/
length = 8 then all digits
length = 9 then lccn[1] is lower case alpha
length = 10 then lccn[1] and lccn[2] are both lower case alpha or both digits
length = 11 then lccn[1] is lower case alpha, lccn[2] and lccn[3] are both lower case alpha or both digits
length = 12 then lccn[1] and lccn[2] are both lower case alpha
]]
local function lccn(lccn)
local handler = cfg.id_handlers['LCCN'];
local err_cat = ''; -- presume that LCCN is valid
local id = lccn; -- local copy of the lccn
id = normalize_lccn (id); -- get canonical form (no whitespace, hyphens, forward slashes)
local len = id:len(); -- get the length of the lccn
if 8 == len then
if id:match("[^%d]") then -- if LCCN has anything but digits (nil if only digits)
err_cat = ' ' .. set_error( 'bad_lccn' ); -- set an error message
end
elseif 9 == len then -- LCCN should be adddddddd
if nil == id:match("%l%d%d%d%d%d%d%d%d") then -- does it match our pattern?
err_cat = ' ' .. set_error( 'bad_lccn' ); -- set an error message
end
elseif 10 == len then -- LCCN should be aadddddddd or dddddddddd
if id:match("[^%d]") then -- if LCCN has anything but digits (nil if only digits) ...
if nil == id:match("^%l%l%d%d%d%d%d%d%d%d") then -- ... see if it matches our pattern
err_cat = ' ' .. set_error( 'bad_lccn' ); -- no match, set an error message
end
end
elseif 11 == len then -- LCCN should be aaadddddddd or adddddddddd
if not (id:match("^%l%l%l%d%d%d%d%d%d%d%d") or id:match("^%l%d%d%d%d%d%d%d%d%d%d")) then -- see if it matches one of our patterns
err_cat = ' ' .. set_error( 'bad_lccn' ); -- no match, set an error message
end
elseif 12 == len then -- LCCN should be aadddddddddd
if not id:match("^%l%l%d%d%d%d%d%d%d%d%d%d") then -- see if it matches our pattern
err_cat = ' ' .. set_error( 'bad_lccn' ); -- no match, set an error message
end
else
err_cat = ' ' .. set_error( 'bad_lccn' ); -- wrong length, set an error message
end
if not is_set (err_cat) and nil ~= lccn:find ('%s') then
err_cat = ' ' .. set_error( 'bad_lccn' ); -- lccn contains a space, set an error message
end
return external_link_id({link = handler.link, label = handler.label,
prefix=handler.prefix,id=lccn,separator=handler.separator, encode=handler.encode}) .. err_cat;
end
--[[--------------------------< P M I D >----------------------------------------------------------------------
Format PMID and do simple error checking. PMIDs are sequential numbers beginning at 1 and counting up. This
code checks the PMID to see that it contains only digits and is less than test_limit; the value in local variable
test_limit will need to be updated periodically as more PMIDs are issued.
]]
local function pmid(id)
local test_limit = 30000000; -- update this value as PMIDs approach
local handler = cfg.id_handlers['PMID'];
local err_cat = ''; -- presume that PMID is valid
if id:match("[^%d]") then -- if PMID has anything but digits
err_cat = ' ' .. set_error( 'bad_pmid' ); -- set an error message
else -- PMID is only digits
local id_num = tonumber(id); -- convert id to a number for range testing
if 1 > id_num or test_limit < id_num then -- if PMID is outside test limit boundaries
err_cat = ' ' .. set_error( 'bad_pmid' ); -- set an error message
end
end
return external_link_id({link = handler.link, label = handler.label,
prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode}) .. err_cat;
end
--[[--------------------------< I S _ E M B A R G O E D >------------------------------------------------------
Determines if a PMC identifier's online version is embargoed. Compares the date in |embargo= against today's date. If embargo date is
in the future, returns the content of |embargo=; otherwise, returns and empty string because the embargo has expired or because
|embargo= was not set in this cite.
]]
local function is_embargoed (embargo)
if is_set (embargo) then
local lang = mw.getContentLanguage();
local good1, embargo_date, good2, todays_date;
good1, embargo_date = pcall( lang.formatDate, lang, 'U', embargo );
good2, todays_date = pcall( lang.formatDate, lang, 'U' );
if good1 and good2 then -- if embargo date and today's date are good dates
if tonumber( embargo_date ) >= tonumber( todays_date ) then -- is embargo date is in the future?
return embargo; -- still embargoed
else
add_maint_cat ('embargo')
return ''; -- unset because embargo has expired
end
end
end
return ''; -- |embargo= not set return empty string
end
--[[--------------------------< P M C >------------------------------------------------------------------------
Format a PMC, do simple error checking, and check for embargoed articles.
The embargo parameter takes a date for a value. If the embargo date is in the future the PMC identifier will not
be linked to the article. If the embargo date is today or in the past, or if it is empty or omitted, then the
PMC identifier is linked to the article through the link at cfg.id_handlers['PMC'].prefix.
PMC embargo date testing is done in function is_embargoed () which is called earlier because when the citation
has |pmc=<value> but does not have a |url= then |title= is linked with the PMC link. Function is_embargoed ()
returns the embargo date if the PMC article is still embargoed, otherwise it returns an empty string.
PMCs are sequential numbers beginning at 1 and counting up. This code checks the PMC to see that it contains only digits and is less
than test_limit; the value in local variable test_limit will need to be updated periodically as more PMCs are issued.
]]
local function pmc(id, embargo)
local test_limit = 6000000; -- update this value as PMCs approach
local handler = cfg.id_handlers['PMC'];
local err_cat = ''; -- presume that PMC is valid
local text;
if id:match("[^%d]") then -- if PMC has anything but digits
err_cat = ' ' .. set_error( 'bad_pmc' ); -- set an error message
else -- PMC is only digits
local id_num = tonumber(id); -- convert id to a number for range testing
if 1 > id_num or test_limit < id_num then -- if PMC is outside test limit boundaries
err_cat = ' ' .. set_error( 'bad_pmc' ); -- set an error message
end
end
if is_set (embargo) then -- is PMC is still embargoed?
text="[[" .. handler.link .. "|" .. handler.label .. "]]" .. handler.separator .. id .. err_cat; -- still embargoed so no external link
else
text = external_link_id({link = handler.link, label = handler.label, -- no embargo date or embargo has expired, ok to link to article
prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode, access=handler.access}) .. err_cat;
end
return text;
end
--[[--------------------------< D O I >------------------------------------------------------------------------
Formats a DOI and checks for DOI errors.
DOI names contain two parts: prefix and suffix separated by a forward slash.
Prefix: directory indicator '10.' followed by a registrant code
Suffix: character string of any length chosen by the registrant
This function checks a DOI name for: prefix/suffix. If the doi name contains spaces or endashes, or, if it ends
with a period or a comma, this function will emit a bad_doi error message.
DOI names are case-insensitive and can incorporate any printable Unicode characters so the test for spaces, endash,
and terminal punctuation may not be technically correct but it appears, that in practice these characters are rarely
if ever used in doi names.
]]
local function doi(id, inactive, access)
local cat = ""
local handler = cfg.id_handlers['DOI'];
local text;
if is_set(inactive) then
local inactive_year = inactive:match("%d%d%d%d") or ''; -- try to get the year portion from the inactive date
text = "[[" .. handler.link .. "|" .. handler.label .. "]]:" .. id;
if is_set(inactive_year) then
table.insert( z.error_categories, "!Páginas com DOI inativos desde " .. inactive_year );
else
table.insert( z.error_categories, "!Páginas com DOI inativos" ); -- when inactive doesn't contain a recognizable year
end
inactive = " (" .. cfg.messages['inactive'] .. " " .. inactive .. ")"
else
text = external_link_id({link = handler.link, label = handler.label,
prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode, access=access})
inactive = ""
end
if nil == id:match("^10%.[^%s–]-/[^%s–]-[^%.,]$") then -- doi must begin with '10.', must contain a fwd slash, must not contain spaces or endashes, and must not end with period or comma
cat = ' ' .. set_error( 'bad_doi' );
end
return text .. inactive .. cat
end
--[[--------------------------< H D L >------------------------------------------------------------------------
Formats an HDL with minor error checking.
HDL names contain two parts: prefix and suffix separated by a forward slash.
Prefix: character string using any character in the UCS-2 character set except '/'
Suffix: character string of any length using any character in the UCS-2 character set chosen by the registrant
This function checks a HDL name for: prefix/suffix. If the HDL name contains spaces, endashes, or, if it ends
with a period or a comma, this function will emit a bad_hdl error message.
HDL names are case-insensitive and can incorporate any printable Unicode characters so the test for endashes and
terminal punctuation may not be technically correct but it appears, that in practice these characters are rarely
if ever used in HDLs.
]]
local function hdl(id, access)
local handler = cfg.id_handlers['HDL'];
local text = external_link_id({link = handler.link, label = handler.label,
prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode, access=access})
if nil == id:match("^[^%s–]-/[^%s–]-[^%.,]$") then -- hdl must contain a fwd slash, must not contain spaces, endashes, and must not end with period or comma
text = text .. ' ' .. set_error( 'bad_hdl' );
end
return text;
end
--[[--------------------------< O P E N L I B R A R Y >--------------------------------------------------------
Formats an OpenLibrary link, and checks for associated errors.
]]
local function openlibrary(id, access)
local code = id:match("^%d+([AMW])$"); -- only digits followed by 'A', 'M', or 'W'
local handler = cfg.id_handlers['OL'];
if ( code == "A" ) then
return external_link_id({link=handler.link, label=handler.label,
prefix=handler.prefix .. 'authors/OL',
id=id, separator=handler.separator, encode = handler.encode,
access = access})
elseif ( code == "M" ) then
return external_link_id({link=handler.link, label=handler.label,
prefix=handler.prefix .. 'books/OL',
id=id, separator=handler.separator, encode = handler.encode,
access = access})
elseif ( code == "W" ) then
return external_link_id({link=handler.link, label=handler.label,
prefix=handler.prefix .. 'works/OL',
id=id, separator=handler.separator, encode = handler.encode,
access = access})
else
return external_link_id({link=handler.link, label=handler.label,
prefix=handler.prefix .. 'OL',
id=id, separator=handler.separator, encode = handler.encode,
access = access}) .. ' ' .. set_error( 'bad_ol' );
end
end
--[[--------------------------< M E S S A G E _ I D >----------------------------------------------------------
Validate and format a usenet message id. Simple error checking, looks for 'id-left@id-right' not enclosed in
'<' and/or '>' angle brackets.
]]
local function message_id (id)
local handler = cfg.id_handlers['USENETID'];
local text = external_link_id({link = handler.link, label = handler.label,
prefix=handler.prefix,id=id,separator=handler.separator, encode=handler.encode})
if not id:match('^.+@.+$') or not id:match('^[^<].*[^>]$')then -- doesn't have '@' or has one or first or last character is '< or '>'
text = text .. ' ' .. set_error( 'bad_message_id' ) -- add an error message if the message id is invalid
end
return text
end
--[[--------------------------< O C L C >----------------------------------------------------------------------
Validate and format an oclc id. https://www.oclc.org/batchload/controlnumber.en.html
]]
local function oclc (id)
local handler = cfg.id_handlers['OCLC'];
local number;
local err_msg = ''; -- empty string for concatenation
if id:match('^ocm%d%d%d%d%d%d%d%d$') then -- ocm prefix and 8 digits; 001 field (12 characters)
number = id:match('ocm(%d+)'); -- get the number
elseif id:match('^ocn%d%d%d%d%d%d%d%d%d$') then -- ocn prefix and 9 digits; 001 field (12 characters)
number = id:match('ocn(%d+)'); -- get the number
elseif id:match('^on%d%d%d%d%d%d%d%d%d%d+$') then -- on prefix and 10 or more digits; 001 field (12 characters)
number = id:match('^on(%d%d%d%d%d%d%d%d%d%d+)$'); -- get the number
elseif id:match('^%(OCoLC%)[1-9]%d*$') then -- (OCoLC) prefix and variable number digits; no leading zeros; 035 field
number = id:match('%(OCoLC%)([1-9]%d*)'); -- get the number
if 9 < number:len() then
number = nil; -- contrain to 1 to 9 digits; change this when oclc issues 10-digit numbers
end
elseif id:match('^%d+$') then -- no prefix
number = id; -- get the number
if 10 < number:len() then
number = nil; -- contrain to 1 to 10 digits; change this when oclc issues 11-digit numbers
end
end
if number then -- proper format
id = number; -- exclude prefix, if any, from external link
else
err_msg = ' ' .. set_error( 'bad_oclc' ) -- add an error message if the id is malformed
end
local text = external_link_id({link=handler.link, label=handler.label,
prefix=handler.prefix, id=id, separator=handler.separator, encode=handler.encode}) .. err_msg;
return text;
end
--[[--------------------------< B I B C O D E >--------------------------------------------------------------------
Validates (sort of) and formats a bibcode id.
Format for bibcodes is specified here: http://adsabs.harvard.edu/abs_doc/help_pages/data.html#bibcodes
But, this: 2015arXiv151206696F is apparently valid so apparently, the only things that really matter are length, 19 characters
and first four digits must be a year. This function makes these tests:
length must be 19 characters
characters in position
1–4 must be digits and must represent a year in the range of 1000 – next year
5 must be a letter
6 must be letter, ampersand, or dot (ampersand cannot directly precede a dot; &. )
7–8 must be letter, digit, ampersand, or dot (ampersand cannot directly precede a dot; &. )
9–18 must be letter, digit, or dot
19 must be a letter or dot
]]
local function bibcode (id, access)
local handler = cfg.id_handlers['BIBCODE'];
local err_type;
local year;
local text = external_link_id({link=handler.link, label=handler.label,
prefix=handler.prefix, id=id, separator=handler.separator, encode=handler.encode,
access=access});
if 19 ~= id:len() then
err_type = 'length';
else
year = id:match ("^(%d%d%d%d)[%a][%a&%.][%a&%.%d][%a&%.%d][%a%d%.]+[%a%.]$") --
if not year then -- if nil then no pattern match
err_type = 'value'; -- so value error
else
local next_year = tonumber(os.date ('%Y'))+1; -- get the current year as a number and add one for next year
year = tonumber (year); -- convert year portion of bibcode to a number
if (1000 > year) or (year > next_year) then
err_type = 'year'; -- year out of bounds
end
if id:find('&%.') then
err_type = 'journal'; -- journal abbreviation must not have '&.' (if it does its missing a letter)
end
end
end
if is_set (err_type) then -- if there was an error detected
text = text .. ' ' .. set_error( 'bad_bibcode', {err_type});
end
return text;
end
--[[--------------------------< C I T E S E E R X >------------------------------------------------------------
CiteSeerX use their own notion of "doi" (not to be confused with the identifiers resolved via doi.org).
The description of the structure of this identifier can be found at Help_talk:Citation_Style_1#CiteSeerX_id_structure
]]
local function citeseerx (id)
local handler = cfg.id_handlers['CITESEERX'];
local matched;
local text = external_link_id({link=handler.link, label=handler.label,
prefix=handler.prefix, id=id, separator=handler.separator, encode=handler.encode,
access=handler.access});
matched = id:match ("^10%.1%.1%.[1-9]%d?%d?%d?%.[1-9]%d?%d?%d?$");
if not matched then
text = text .. ' ' .. set_error( 'bad_citeseerx' );
end
return text;
end
--[[--------------------------< B U I L D _ I D _ L I S T >--------------------------------------------------------
Takes a table of IDs created by extract_ids() and turns it into a table of formatted ID outputs.
inputs:
id_list – table of identifiers built by extract_ids()
options – table of various template parameter values used to modify some manually handled identifiers
]]
local function build_id_list( id_list, options )
local new_list, handler = {};
local function fallback(k) return { __index = function(t,i) return cfg.id_handlers[k][i] end } end;
for k, v in pairs( id_list ) do -- k is uc identifier name as index to cfg.id_handlers; e.g. cfg.id_handlers['ISBN'], v is a table
-- fallback to read-only cfg
handler = setmetatable( { ['id'] = v, ['access'] = options.IdAccessLevels[k] }, fallback(k) );
if handler.mode == 'external' then
table.insert( new_list, {handler.label, external_link_id( handler ) } );
elseif handler.mode == 'internal' then
table.insert( new_list, {handler.label, internal_link_id( handler ) } );
elseif handler.mode ~= 'manual' then
error( cfg.messages['unknown_ID_mode'] );
elseif k == 'BIBCODE' then
table.insert( new_list, {handler.label, bibcode( v, handler.access ) } );
elseif k == 'BIORXIV' then
table.insert( new_list, {handler.label, biorxiv( v ) } );
elseif k == 'CITESEERX' then
table.insert( new_list, {handler.label, citeseerx( v ) } );
elseif k == 'DOI' then
table.insert( new_list, {handler.label, doi( v, options.DoiBroken, handler.access ) } );
elseif k == 'HDL' then
table.insert( new_list, {handler.label, hdl( v, handler.access ) } );
elseif k == 'ARXIV' then
table.insert( new_list, {handler.label, arxiv( v, options.Class ) } );
elseif k == 'ASIN' then
table.insert( new_list, {handler.label, amazon( v, options.ASINTLD ) } );
elseif k == 'LCCN' then
table.insert( new_list, {handler.label, lccn( v ) } );
elseif k == 'OL' or k == 'OLA' then
table.insert( new_list, {handler.label, openlibrary( v, handler.access ) } );
elseif k == 'PMC' then
table.insert( new_list, {handler.label, pmc( v, options.Embargo ) } );
elseif k == 'PMID' then
table.insert( new_list, {handler.label, pmid( v ) } );
elseif k == 'OCLC' then
table.insert( new_list, {handler.label, oclc( v ) } );
elseif k == 'ISMN' then
table.insert( new_list, {handler.label, ismn( v ) } );
elseif k == 'ISSN' then
table.insert( new_list, {handler.label, issn( v ) } );
elseif k == 'EISSN' then
table.insert( new_list, {handler.label, issn( v, true ) } ); -- true distinguishes eissn from issn
elseif k == 'ISBN' then
local ISBN = internal_link_id( handler );
local check;
local err_type = '';
-- if not check_isbn( v ) and not is_set(options.IgnoreISBN) then
-- ISBN = ISBN .. set_error( 'bad_isbn', {}, false, " ", "" );
-- end
check, err_type = check_isbn( v );
if not check then
if is_set(options.IgnoreISBN) then -- ISBN is invalid; if |ignore-isbn-error= set
add_maint_cat ('ignore_isbn_err'); -- ad a maint category
else
ISBN = ISBN .. set_error( 'bad_isbn', {err_type}, false, " ", "" ); -- else display an error message
end
elseif is_set(options.IgnoreISBN) then -- ISBN is OK; if |ignore-isbn-error= set
add_maint_cat ('ignore_isbn_err'); -- because |ignore-isbn-error= unnecessary
end
table.insert( new_list, {handler.label, ISBN } );
elseif k == 'USENETID' then
table.insert( new_list, {handler.label, message_id( v ) } );
else
error( cfg.messages['unknown_manual_ID'] );
end
end
local function comp( a, b ) -- used in following table.sort()
return a[1] < b[1];
end
table.sort( new_list, comp );
for k, v in ipairs( new_list ) do
new_list[k] = v[2];
end
return new_list;
end
--[[--------------------------< E X T R A C T _ I D S >------------------------------------------------------------
Populates ID table from arguments using configuration settings. Loops through cfg.id_handlers and searches args for
any of the parameters listed in each cfg.id_handlers['...'].parameters. If found, adds the parameter and value to
the identifier list. Emits redundant error message is more than one alias exists in args
]]
local function extract_ids( args )
local id_list = {}; -- list of identifiers found in args
for k, v in pairs( cfg.id_handlers ) do -- k is uc identifier name as index to cfg.id_handlers; e.g. cfg.id_handlers['ISBN'], v is a table
v = select_one( args, v.parameters, 'redundant_parameters' ); -- v.parameters is a table of aliases for k; here we pick one from args if present
if is_set(v) then id_list[k] = v; end -- if found in args, add identifier to our list
end
return id_list;
end
--[[--------------------------< E X T R A C T _ I D _ A C C E S S _ L E V E L S >--------------------------------------
Fetches custom id access levels from arguments using configuration settings.
Parameters which have a predefined access level (e.g. arxiv) do not use this
function as they are directly rendered as free without using an additional parameter.
]]
local function extract_id_access_levels( args, id_list )
local id_accesses_list = {};
for k, v in pairs( cfg.id_handlers ) do
local access_param = v.custom_access;
local k_lower = string.lower(k);
if is_set(access_param) then
local access_level = args[access_param];
if is_set(access_level) then
if not in_array (access_level:lower(), cfg.keywords['id-access']) then
table.insert( z.message_tail, { set_error( 'invalid_param_val', {access_param, access_level}, true ) } );
access_level = nil;
end
if not is_set(id_list[k]) then
table.insert( z.message_tail, { set_error( 'param_access_requires_param', {k_lower}, true ) } );
end
if is_set(access_level) then
access_level = access_level:lower();
end
id_accesses_list[k] = access_level;
end
end
end
return id_accesses_list;
end
--[[--------------------------< S E T _ S E L E C T E D _ M O D U L E S >--------------------------------------
Sets local cfg table and imported functions table to same (live or sandbox) as that used by the other modules.
]]
local function set_selected_modules (cfg_table_ptr, utilities_page_ptr)
cfg = cfg_table_ptr;
is_set = utilities_page_ptr.is_set; -- import functions from select Module:Citation/CS1/Utilities module
in_array = utilities_page_ptr.in_array;
set_error = utilities_page_ptr.set_error;
select_one = utilities_page_ptr.select_one;
add_maint_cat = utilities_page_ptr.add_maint_cat;
substitute = utilities_page_ptr.substitute;
z = utilities_page_ptr.z; -- table of tables in Module:Citation/CS1/Utilities
end
return {
build_id_list = build_id_list,
extract_ids = extract_ids,
extract_id_access_levels = extract_id_access_levels,
is_embargoed = is_embargoed;
set_selected_modules = set_selected_modules;
}